EN 139
Intended Use
Product overview
1 Switch-on lock
2 Handlebar
3 Protection shield
4 Cutting bar
5 Impact guard
6 Cable bracket
7 Power supply cord
8 On/O switch
9 Rear handle
Connecting the tool
Connect the hedge trimmer with an
outdoor extension cord and plug it into
a suitable wall socket.
Note: Extension cords longer than
30 m reduce the output.
For strain relief: Insert a loop of
the extension cord through the
cable bracket 6.
1 2
This garden tool is
– intended for cutting and trimming hedges
and bushes which have a maximum branch
thickness of -24 mm;
– designed for maintaining hedges and bush-
es in the private sector,
– not suitable for work above shoulder height,
– to use according to the descriptions and
safety instructions indicated in this operat-
ing manual.
Any other use is not as intended. Improper use
is not covered by the warranty and the manu-
facturer will reject any liability. The user is li-
able for all injuries to third parties and damage
to their property.
Operate the unit only in the technical condition
as stipulated and delivered by the manufac-
turer.
Arbitrary changes to the unit will exclude the
manufacturer from any liability for resulting
injury and/or damage.
3
6
4
7
8
1
5
9
2
1 2
To Next Page
Loading...
