Identification of the SmartNode devices via SNMP 54
SmartNode 4950 User Manual B • Specifications
Note
The SysObjectIDs for the SN4950 G.SHDSL models are the same as the
corresponding non-G.SHDSL models listed above.
According to table 13, an SNMP get request to .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID of a Smart-
Node 4950/1E15V/EUI device reads out a numeric OID of 1.3.6.1.4.1.1768.100.4.15.1, which represents a
SmartNode 4950/1E15V/EUI device. The mapping of the sysObjectID to each of the SmartNode model is
realized with the SmartNode product identification MIB.
SN4951/4E120V .iso.org.dod.internet.private.enterprises.patton.products.sn49xx.20
1.3.6.1.4.1.1768.100.4.15.20
The SNMP agent running in SmartWare is SNMP version 1
(SNMPv1) compliant. SNMP version 2 (SNMPv2) and SNMP
version 3 (SNMPv3) are not currently supported.
Table 13. SmartNode Models and their Unique sysObjectID (Continued)
SmartNode Model SysObjectID
IMPORTAN
To Next Page
Loading...