Paul C. Buff Einstein E640 - Global Power Line Operation; Automatic Voltage Sensing; Power Cord Options

Toll Free 1-800-443-5542 HERE TO HELP
[
21
]
MAXFT12MMUV ashtube
standard JD250W bulb
QL150 (left); 25W (right)
fuse holder
standard Paul C. Buff™ UPC15 power cord
(120 V, for use in North America)
standard
IEC connector
North American
120 V plug
standard
IEC connector
Australia / China
230 V plug
international VM-UPC15-230V power cord
(230 V, for use in Australia and China)
USING EINSTEIN
™
ON GLOBAL POWER LINES
The Einstein™ ash unit offers global plug-and-play with automatic power switching that allows
the unit to operate on power lines from 95 to 265 Vac, 50 or 60 Hz, automatically sensing the
voltage / frequency and adjusting accordingly with no user attention required. The unit can
tolerate momentary power line voltages as low as 35 Vac from the Vagabond Mini™ Lithium
portable power system or from other similar pure sine inverters without crashing, whereas many
competitive digital ash units crash if the input voltage falls below about 80 to 90 Vac. No user
intervention or lamp changing is required to operate at different AC line voltages.
Note: The Einstein™ ash unit’s precision WYSIWYG modeling lamp tracking will not allow the
modeling lamp to reach full brightness at input voltages below 115 Vac, but will still track at
input voltages from 95 to 265 Vac.
For use in North America, the unit arrives with a 15-foot power cord that has a standard IEC
connector on one end and a grounded, three-pronged male plug on the other. This power
cord connects to the ash unit on its back control panel and is then plugged into a suitable
120 Vac, 50-60 Hz grounded power outlet. For use in Australia and China, we offer an optional
power cord, available in both 15-foot (part # VM-UPC15-230V) and 3-foot (part # VM-UPC3-
230V) lengths (both sold separately, visit our website at www.paulcbuff.com/powercords.php).
To use the Einstein™ unit in other areas of the world with varying power outlet congurations, you
will simply need an IEC power cord with a standard IEC connector on one end and the suitable
plug on the other end with the correct plug conguration specic to your area. A standard
power cord can be purchased locally, found in electronic and computer stores.