[
16
]
EINSTEIN
™
by Paul C. Buff
USING ACCESSORIES
All Paul C. Buff™ accessories are sold separately.
Visit
our website (www.paulcbuff.com) to learn more
and see our full line of compatible accessories
and light modiers.
Remote Controls: The Einstein™ unit includes a
slot for the CyberSync™ CSXCV Transceiver
for use with the Cyber Commander™ remote
control to provide complete wireless ring and
parameter adjustment. With this setup, the Cyber
Commander™ unit can be used to remotely
power on an Einstein™ unit that is plugged into
a power source. The unit may be used with all
CyberSync™ transmitters and receivers (see
page 18 for more). Einstein™ may not be used
with the LG4X wired remote control or older Paul
C. Buff™ remotes incorporating the telephone
cord connection. The unit is compatible with
most other third party triggering receivers (such
as the PocketWizard®). A 1/8-inch to 1/8-inch
non-attenuated mini male mono cord such as
our CSSC is required to connect the receiver to
the Einstein™ unit. The Einstein™ is additionally
compatible with the PocketWizard® PowerMC2
for use with the PocketWizard® system.
Softboxes and Reectors: The Einstein™ faceplate
with the standard BUFF™ / Balcar mount has
four holding ngers that expand and contract
to hold various reectors as well as speedrings
for softbox attachment. While the Einstein™ unit
does not arrive with a particular reector, for
general use we recommend the 8.5HOR 8.5-inch
high-output silver reector. The unit is compat-
ible with our full line of reectors, beauty dishes,
the LiteMod™ mainframe and associated acces-
sories, and our foldable softboxes, octaboxes
or stripbox as well as retired models of Paul C.
Buff™ softboxes.
Paul C. Buff™ CSXCV Transceiver
PocketWizard® PowerMC2
Paul C. Buff™ Einstein™ faceplate