Home
Paul
Heating System
NOVUS 300
Paul NOVUS 300 Service Instructions
5
of 1
of 1 rating
58 pages
Give review
Manual
Specs
To Next Page
To Next Page
Loading...
Version: 2.0_10
/2015
Service instructions for qualified personnel
Mechanical Ventilation Heat Recovery Unit
NOVUS (F) 300 / 450
(for units from seri
al
no.
15000
-2)
2
Table of Contents
Table of Contents
2
Type Plate
3
Principal Configuration of the System
4
Replacement of the Filters
5
Replacement of the Filters of the Device
5
Resetting the Filter Run-Time
7
Replacement of the Heat Exchanger
9
Replacement of the Integrated Defroster
13
Replacement of the Master Board, Slave Board and BUS Thermostat
19
Replacement of the Fan
25
Replacement of the Bypass Motor
30
Installation of a Condensate Drain
37
Messages, Errors and Error Handling
40
Error Signalling by Means of the LED Control Panel
40
Visualisation of Errors with the TFT Touch Panel
41
Error Handling
43
Error Fan
43
Error Temperature Sensor
44
Communication Error Defroster, Back Heater, Geothermal Heat Exchanger
45
Communication Error Fan Slave
46
TFT Without Communication
47
Error Bypass with TFT
48
Error Intake Air too Low
49
Error Supply Air too Low
50
Fan too Noisy
51
Heat Recovery too Low
52
Failure or Problems Without a Message
53
Appendix
54
Appendix 1 Circuit Diagram NOVUS
54
Appendix 2 Circuit Diagram NOVUS with Integrated Defroster
55
Appendix 3 Terminal Scheme of through Terminal X10
56
Notes
57
Other manuals for Paul NOVUS 300
Original Operating Instructions
68 pages
5
Based on 1 rating
Ask a question
Give review
Questions and Answers:
Need help?
Do you have a question about the Paul NOVUS 300 and is the answer not in the manual?
Ask a question
Paul NOVUS 300 Specifications
General
Maximum air flow
300 m³/h
Voltage
230 V
Frequency
50 Hz
Phase
1
Filter class
G4
Mounting
Wall-mounted
Weight
25 kg
Related product manuals
Paul NOVUS 450
68 pages
Paul FOCUS 200 Base
40 pages
Paul CLIMOS F 200 Eco
41 pages
Need help?
General
To Next Page
