4 Commissioning [specialist]
2019/09 99E13331xx-mub-en - V02 11
4 Commissioning [specialist]
Risk to life and limb due to electric shock!
Be sure to perform all the measures listed in the Installation section before
starting the first commissioning.
If the controller is connected for the first time, the message "Please carry out the first start-up" is
displayed on the screen.
After the confirmation, a range of parameters are displayed. The parameters need to be
adjusted in order for the controller to run properly. To confirm the settings, select the
menu item
"Save".
If an external storage (USB flash drive) is connected to the USB port, the protocol of the first
commissioning will be stored on it.
To Next Page
Loading...
