1 General Information
2019/09 99E13331xx-mub-en - V02 5
1 General Information
1.1 Scope of these instructions
These instructions describe the function, installation and commissioning of the DHW controller
FC3.10. The chapters called [specialist] are intended for specialists only.
For other components of the heating system, such as valves, please follow the instructions of
the respective manufacturer.
1.2 Designated use
The domestic hot water controller, subsequently referred to as the controller, is an
independently installed electronic temperature controller for on-surface installation.
The integration into a pump assembly is possible when the technical specifications of the
controller are adhered to. The maintenance-free controller is exclusively intended for the
controlling and monitoring of a PAW domestic hot water module. Only use PAW accessories
with the controller.
1.3 EC Declaration of Conformity
This product conforms to the applicable European directives with regard to its design and its
operating behaviour. This conformity has been verified.
Further information in this regard can be obtained from your dealer.
1.4 Target group
The target audience of this manual are technical professionals who:
• Have the knowledge of terminology and the skills necessary for setting up and
operating domestic hot water stations.
• Have the necessary professional training, knowledge and experience as well
as the knowledge of the relevant regulations, in order to evaluate the following
work and to detect potential dangers:
– Installation of electrical devices
– Assembly and connection of data lines
– Assembly and connection of power supply lines
Carefully read these instructions before installation and commissioning.
Save these instructions in the vicinity of the installation for future reference.
To Next Page
Loading...
