13
[1] Press up on the edge of the grille to open.
[2] Pull the lever sideways to unlock the front panel
[3] Remove the front panel down to release it.
[4] Turn on the main switch.
[5] Replace the front panel by pressing the lid in their
strongholds.
[6] Flip the lever back into its locked position [2].
Note: Turn on / o the main power switch [4].
Use this button when doing maintenance or leaving
home for a long time.
How to use Pax Eos100/100H.
GB
S
Start the unit by pressing the button
on the control panel or remote control.
Wait, the unit opens the dampers for outdoor air
and exhaust air, which will take about 1 minute.
Now, moisture adjustment, operating mode and
fan speed can be selected.
Turn on/o the aggregate.
How to use.
UK
Turn on/o the main power switch.
[1]
[2] [6]
[4]
[3] [5]
To Next Page
Loading...
Need help?
General
