2
The following warnings and instructions MUST be adhered to. Read the instructions before installing and powering the equipment. Keep the instructions in a safe place for future
reference.
RECEIVING INSPECTION - Remove any traces of packing material from the unit as such debris may create a re or shock hazard. Unpack the unit with care and inspect for transit
damage. If damage is suspected, the unit must not be used or tested, but you should immediately contact Paxton technical support to assist in troubleshooting or to provide return
authorization. INSTALLATION - Only qualied and trained personnel, familiar with this type of product and who fully understand these instructions should install, connect or test
this equipment.
To Next Page
Loading...
Need help?
General
