Paxton Net2 PaxLock Instruction

PAGE 1
02/23/2012
Parts list
Tools List
Power Drill
Drill bits
3
/8",
5
/8"
Philips screwdriver
Small at blade terminal screwdriver
Pencil
4mm Allen key (supplied)
Technical Support
Technical help is available: Monday - Friday from 02:00 AM - 8:00 PM (EST)
1.800.672.7298 supportUS@paxton-access.com
Ins-30168-US Net2 PaxLock
Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/
Net2Air Site Surveyor (690-200-US).
This access control unit uses wireless
communication. It is recommended that a
Net2Air site surveyor is used to determine the
best position for the bridge and control units.
This wireless unit requires a Net2Air bridge
to communicate with the server PC.
Paxton
1
2
3
4
5 6
7
8
9
AA
AA
-
-
+
+
1) Front Lock Assembly
2) Rear Lock Assembly
3) Door Handle x 2
4) Mounting screw (1
1
/4") x 2
5) Mounting screw ( 1
1
/2") x 2
6) Mounting screw ( 1
3
/4" ) x 2
7) 8 mm Spindle
8) AA battery x 4
9) 4 mm Allen Key
This unit requires Net2 v4.23 or later software.
Call Technical Support if you require advice.

Paxton Net2 PaxLock Specifications

General

Brand	Paxton
Model	Net2 PaxLock
Category	Door locks
Language	English