PAYCHEX TrueShift - Choose Your Connection Option; Wifi Connection; Ethernet Connection; USB Connection

The TrueShift time clock includes three standard connection options. Choose
your preferred connection method below, follow the corresponding
instructions later in the guide.
• Windows PC (Vista or above)
• An available USB Port
on the PC
4
CHOOSE YOUR CONNECTION OPTION
1. Wifi Connection
3. USB Connection
PLEASE CHOOSE
ONE CONNECTION OPTION
BEFORE MOVING FORWARD
System Requirements
A. Plug the power supply into the power supply port located on the bottom
of the clock.
B. Plug the power supply into the wall outlet.
C. The display will state Set Date/Time.
D. Press or on the time clock to select the current month. Press Enter.
E. Follow the same procedure to advance through each step, setting the date
and time. If a mistake is made, press Clear to go back.
F. Once complete, the time clock will display Date and Time Set.
If the clock detects a wifi connection, it will display, Network detected press
Entry. Go to Panel 5
System Requirements
•
Wireless router
• Available network
2. Ethernet Connection
System Requirements
• available network port on your
router, modem or switch.
Go to Panel 6
Go to Panel 5
Go to Panel 5