443B101/443B102 9
Manual 19854 Rev. D
ECN 50523
Command Set
This list of commands is the currently supported set that is applicable to the 443B101 and 443B102 Dual Mode Amplifier
modules.
Command: MMOD
Purpose: This command returns the module type of the card at the location specified by the
command.
Response: The response string is 3 ASCII printable characters that correspond to the module type
of the module at the location specified by the command.
Command Attribute: This command is supported by all modules using the protocol defined for the 441 series
racks (it is a common or “CMM” command).
Command String: XYCMMMMOD
Description: X—Rack number of the target module (Range: ASCII printable characters, 0 through 3)
Y— Slot number of the target module. (Range: ASCII printable characters, 0 through 7)
CMM—Module type for the target. Specifying "CMM" in this argument indicates the
intention of any module type that may be found in Rack X, Slot Y. (Range: 3 ASCII
printable characters)
MMOD—Commands target module to return its 3 character module type.
Response String: “C01” for 443B101 and “C02” for 443B102
Description: These 3 ASCII printable characters are the module type of the module at the location
specified by the command.
Example: Command String: “02CMMMOD”
Response String: “C02”
The module type of the card in rack 0 and slot 2 is a C02 (443B102).
To Next Page
Loading...