2: Mainboard Installation
7
Chapter 2
Mainboard Installation
To install this mainboard in a system, follow the procedures in this
chapter:
q Identify the mainboard components
q Install a CPU
q Install one or more system memory modules
q Verify that any jumpers or switches are set correctly
q Install the mainboard in a system chassis (case)
q Connect any extension brackets or cables to the mainboard
connector headers
q Install any other devices and make the appropriate connections
to the mainboard connector headers.
Note:
1. Before installing this mainboard, make sure jumper JP4 set to
Normal setting. See this chapter for information on locating
JP4 and the setting options.
2. Never connect power to the system during installation. Doing
so may damage the mainboard.
To Next Page
Loading...
