INTRODUCTION
Congratulations on your purchase of the humidity
and temperature datalogger. This datalogger module
can be used to monitor humidity and temperature of
greenhouses, warehouses, food transports, aircraft
cabins, refrigerated trucks, containers, museums, and
HVAC equipment. It measures and stores up to
16,000 relative humidity and 16,000 temperature
readings over 0 to 100%RH and -40 to +70°C (-40 to
+158°F) measurement ranges. user can easily set up
the logging rate, high/low alarm and start-mode, and
download the stored data by plugging the module
straight into a PC's USB port and running the
purpose designed software under Windows 98, 2000,
XP, or Vista. Relative humidity, temperature and dew
point (the temperature at which water vapor present
in the air begins to condense) data can then be
graphed, printed and exported to other applications.
The data logger is supplied with a long-life lithium
battery, which can typically allow logging for a year.
Status indication is via flashing Red /Yellow LED and
Green LED.
FEATURES
Memory for 32000 readings(16000 temperature
and 16000 humidity readings)
Dew point indication via Windows Software
Selectable measuring cycle: 2s, 5s, 10s, 30s, 1m,
To Next Page
Loading...
Need help?
General
