PDC spas Accent User Manual

Show and Set Time of Day
Seng the me-of-day can be important for determining filtraon mes and other background features. When in the TIME menu,
SET TIME will ash on the display if no me-of-day is set in the memory.
Seng Time:
1) Repeatedly press menu key unl set me or me appears on screen.
2) Press up or down arrow to adjust hour.
3) Press menu key to switch to minutes.
4) Press up or down key to adjust minutes.
5) Press menu key to exit.
If power is interrupted to the system, Time-of-Day is not stored. The system will sll operate and all other user sengs will be
stored. If filter cycles are required to run at a parcular me of day, reseng the clock will return the filter mes to the actual
programmed periods.
When the system starts up, it defaults to 12:00 Noon, so another way to get filter mes back to normal is to start up the spa at
noon on any given day. SET TIME will sll ash in the TIME Menu unl the me is actually set, but since the spa started at noon,
the filter cycles will run as programmed.
Restricng
The control can be restricted to prevent unwanted use or temperature adjustments. Locking the panel prevents the controller from
being used, but all automac funcons are sll acve.
Locking the Temperature allows Jets and other features to be used, but the Set Temperature and other programmed sengs
cannot be adjusted. Temperature Lock allows access to a reduced selecon of menu items. These include Set Temperature, FLIP,
LOCK, UTIL, INFO and FALT LOG. Unlock sequence may be used from any screen that may be displayed on a restricted panel.
Lock Panel
1) Press menu key unl Lock appears.
2) Press up key, temp will be displayed.
3) Press menu buon, panel will be displayed.
4) Press up key twice, ON will be displayed.
5) Press menu buon to lock panel.
Hold
Hold—M037*
Hold Mode is used to disable the pumps during service funcons like cleaning or replacing the filter. Hold Mode will last for 1 hour
unless the mode is exited manually.
Set Hold:
1) Press menu key repeatedly unl hold is displayed.
2) Press up arrow to enter hold.
3) Press down arrow to exit hold.
Adjusng
Main Filtraon
Filter cycles are set using a start me and a duraon. Start me is indicated by an “A” (AM) or “P” (PM) in the boom right corner of
Lock Temp
1) Press menu key unl Lock appears.
2) Press up key for temp lock.
3) Press temp buon again.
4) Press temp buon to ON.
5) Press menu buon to exit.
Unlock Panel
1) Press menu.
2) Press and hold up key.
3) Press menu buon twice to unlock.
Unlock Temp
1) Press temp buon unl Lock appears.
2) Press up key, temp will be displayed.
3) Press and hold up key buon.
4) Press menu buon twice.

PDC spas Accent Specifications

General

Brand	PDC spas
Model	Accent
Category	Controller
Language	English