Operaon Systems— Waterway Neo 2100 Series Control, TruSwim® Models
38
1.To program the SWIM WORKOUT; press
the MENU buon; then up buon and select
SWIM WORKOUT by pressing the MENU
buon to get to the SPEED 1 seng.
1.Press the SWIM buon to
turn the pump ON—the blue
SWIM icon on the LCD screen
turns ON the propulsion system
at 5%.
3.Press the SWIM buon
again to turn OFF the pump
(the pump will connue to
run unl re‐seng to 5%
then turns off) the blue
SWIM icon on the LCD
screen turns off.
2.Then press UP or DOWN
buon to select your desired
SPEED % between 5% and 100%.
The duraon is preset to 20
minutes. Allow system to reach
set point before readjusng.
SwimBuon
3.Press the UP or DOWN buon to select the SPEED % for
SPEED 2, then press the MENU buon to select DURATION in
minutes up to 10 minutes, then press MENU buon twice to get
to SPEED 3.
WorkoutBuon
2
2.Press the UP or DOWN buon to select the SPEED %
(between 5% and 100%) for SPEED 1; then press the MENU
buon to select DURATION in minutes up to 10 minutes;
then press the MENU buon twice to get to SPEED 2.
4.Press the UP or DOWN
buon to select the SPEED
% for SPEED 3; then press
the MENU buon to select
DURATION in minutes, up
to 10 minutes, then press
the MENU buon twice to
get out of SPEED 4. Repeat
this step for up to 10
sengs.
5.Press the UP or DOWN
buon to select the speed
for SPEED 4; then press
the MENU buon to select
DURATION in minutes, up
to 10 minutes; then press
the RETURN buon twice
to get out of the SWIM
WORKOUT screen.
6.Press the SWIM WORKOUT
buon to turn ON the pump, the
red SWIM icon on the LCD
screen turns ON. The WORKOUT
feature will acvate to cycle
each of the SPEED seng and
specific DURATION seng for
WORKOUT. If you need to
increase or decrease pump
speed manually, press the UP or
DOWN buon to your desired
SPEED % in each cycle.
7.Press the SWIM
WORKOUT buon again at
any me, to turn OFF the
pump—the red SWIM icon
on the LCD screen turns
OFF.
At the end of the
programmed workout, the
red icon on the LCD screen
and pump turn off.
10
10