PDC spas SYNERGY Series FX15 User Manual

Regular Maintenance ‐TruSwim® Series
52
TheTruSwim®Seriesmodelsrequireaddionalmaintenancepr ocedurestoassureproperoperaonofthe
propulsionsystem.Followtheguidelinesbelow,recordingthedateinthechartfoundinthebackofthismanual,
assuringflawlessperformanceofyourTruSwimswimspa.

 Weekly


Check all sucon grates and the return grid making sure they are free of any flow restricon debris.
To clean sucon grates / return grid
1. Turn off all power to swim spa.
2. Remove screws of sucon grate / return grid to be cleaned.
3. Remove and clean sucon grate / return grid.
4. Reinstall grate / return grid.
5. Reinstall all screws assuring securely in place.
6. Turn power on.
 Every6Months

Remove and clean the return grid of any and all debris. Follow instrucons above for cleaning.
 Every12Months

For TruSwim® Series models, remove the end cabinet panel and check the hydraulic oil level of the hydraulic oil
reservoir. Oil reservoir should be 3/4 full. If oil is needed, add biodegradable oil supplied by PDC Spas for TruSwim®
propulsion systems only. Use of any other fluid will void warranty.
 Every30Months

We recommend your service center remove the TruSwim® wall and inspect the hydraulic motors and props for
unusual wear. Replace any parts as needed.
 Every60Months

We recommend your service center inspect and replace the hydraulic motors and props if needed. 

PDC spas SYNERGY Series FX15 Specifications

General

Brand	PDC spas
Model	SYNERGY Series FX15
Category	Hot Tub
Language	English