PDi DM68 - Capacitance; Frequency; Current (with Clamp. Optional); DC Current

400nF
+(3.0% of rdg+3 digits)
4.2.7 Capacitance
Overload protection:
250Vdc or 250Vac rms.
Range
4nF
40nF
4.2.8 Frequency
I Range I Resolution I Accuracy
Resolution
I pF
1 OpF
4.2.9 Current (with clamp, optional)
-
Accuracy
i(5.0% of rdg+5 digits)
9.999Hz
99.99Hz
999.9Hz
9.999kHz
99.99kHz
199.9kHz
>2OOkHz
Range I Resolution 1 Accuracy
DC40A I O.1Nl mV I *(0.8% of rdg+3 digits)
Overload protection: 250V dc or 250V ac rms.
lnput Voltage range:
0.6V-3V ac rms (Input voltage must be
enlarged with increasing frequency
under measurement)
Frequency Response: 1
OHzPOOkHz, sine wave.
0.5Hz-200kHz, square wave.
0.001 Hz
0.01 Hz
Hz
1 Hz
lOHz
1 OOHz
1 OOHz
*(2.0% of rdg+5 digits)
Unspecified
@ >200kHz
DC400A
AC40A
AC400A
1-1 r(1.2% of rdg+3 digits) 1
0.01 mA
4.2.10 DC CURRENT
10A ( IOmA 1 42.0% of rdg+5 digits) I
lnput impedance: 1 MR
Max. input voltage: 250Vdc or 250Vac rms.
24
0.1
PJl mV
O.1Nl mV
O.1AflmV
Overload protection: F 10PJ250V fuse for A range. F
500mA1250V fuse for pA and mA
ranges.
Maximum input current:
400mA dc or 400mA ac rms for pA
and mA ranges, 10A dc or 10A ac
Accuracy
Range
1 Resolution
i(0.8% of rdg+3 digits)
i(l .O% of
rdg+3 digits)
*(I .O% of rdg+3 digits)
rms for A ranges.
For
measurements>5A, 4 minutes maximum ON to measure
10 minutes
OFF.
400pA 0.1@
4000pA
1-1 0.01 mA
+(I .5Y0 of rdg+5 digits)
4.2.11 AC CURRENT
400mA I O.lmA I
10A I 1 OmA 1 i(3.0% of rdg+7 digits)
Range
4ow
Overload protection: F 10N250V fuse for A range.
F
500mN250V fuse for pA and mA
ranges.
Maximum input current:
400mA dc or 400mA ac rms for pA
and mA ranges, 10A dc or 10A ac
rms for A ranges.
Frequency Range:
40Hz-1 kHz
Response: Average, calibrated in rrns of sine wave
25
Resolution
0.1pA
Accuracy