PDi PDI-P22LCDC - User Manual

Questions and Answers

G
gabrielclineAug 14, 2025
How to fix PDi LCD TV remote control that is not working?
- R
  Rebecca JarvisAug 14, 2025
  If your PDi LCD TV remote control isn't working, try these steps: First, change the remote’s batteries. If that doesn't work, make sure that the TV’s IR window is not exposed to strong lights, such as those from fluorescent lamps. If you have a Patient Remote, verify the correct Bed Code settings.
M
Mary FreemanAug 17, 2025
What to do if my PDi LCD TV has no picture and no sound?
- G
  gabriel64Aug 17, 2025
  If your PDi LCD TV has no picture and no sound, first ensure the TV is powered on and the power indicator is red. Then, turn on the TV using the “ON/OFF” power button.
C
Cameron ButlerAug 21, 2025
Why is there no sound on my PDi LCD TV but the picture is fine?
- L
  larrykirkAug 21, 2025
  If you have picture but no sound on your PDi LCD TV, check the volume settings and make sure the sound hasn't been muted. Also, verify the pillow speaker is connected properly and the volume wheel is adjusted correctly. If you're using a secondary source, check the audio input signal connection.
B
Brent StoutAug 25, 2025
How to troubleshoot no picture but sound is OK on PDi LCD TV?
- K
  Kathleen OrtizAug 26, 2025
  If you have sound but no picture on your PDi LCD TV, check the brightness setting of the TV. Also, if a secondary source is selected, verify the video input signal is connected. The internal LCD panel lamps may have failed.
X
xescobarAug 27, 2025
Why is the picture too dark on my PDi LCD TV?
- C
  Cory WilliamsonAug 28, 2025
  If the picture on your PDi LCD TV is too dark, first verify that the brightness setting is correct and not set too low. Also, the internal LCD panel lamps may have failed.
A
Amber SimmonsAug 31, 2025
How to fix no sound from internal speakers on PDi LCD TV?
- D
  Danielle MccoyAug 31, 2025
  To fix the issue of no sound from the internal speakers on your PDi LCD TV, verify that the TV speaker has not been disabled in the “Internal Speaker Disable” setup menu. Also, ensure that the sound hasn't been muted.
L
Lisa DavisSep 4, 2025
What causes a blurry or jittery picture on a PDi LCD TV?
- A
  Andrea ClarkSep 4, 2025
  A blurry or jittery picture on your PDi LCD TV may be due to a weak cable TV signal. Verify that the coax cable is securely connected.
N
nvazquezSep 7, 2025
What causes ghost images on my PDi LCD TV screen?
- C
  Cynthia GarciaSep 7, 2025
  Ghost images on your PDi LCD TV screen may be caused by a weak cable TV signal or a loose coax cable connection.
T
timothy99Sep 10, 2025
What causes moving stripes or dots on my PDi LCD TV screen?
- P
  powerserikaSep 10, 2025
  Moving stripes or dots on your PDi LCD TV screen can be caused by possible interference from nearby hospital equipment or a weak cable TV signal.