11
WARNING - HOT SUR-
FACES! HAZARD OF
BURNS! The heating element
7
can become very hot.
To prevent injuries, do not
touch the heating element
7
immediately after shrink-
wrapping.
Do not leave the device un-
attended when it is switched
on.
Always place the device on a
at, solid and heat-resistant
work surface during use.
Carefully read the operating
instructions before use.
Only operate the device in-
doors. Do not use it outside
or in a damp environment.
Do not use the device in con-
junction with an extension
cable.
Keep the device and cable
away from high temperatures
and warm or damp environ-
ments.
The device does not require
a lubricating agent. Do not
use an organic solvent to
clean the device.
To prevent pressure on the
rubber seal
8
do not close
the cover of the device after
use.
To prevent damage to the
device, the vacuum tube
cannot be cleaned. Please
do not vacuum food products
which contain a lot of water.
To prevent injuries, do not
open the cover or touch the
vacuum chamber
10
when
the device is connected to
the power supply.
Parts description
1
Stop button
2
Vacuum seal button
3
Heat seal button
4
Cover release (left and right)
5
LED-Display Vacuuming
6
LED-Display Heat Sealing
7
Heating element
8
Seal
9
Vacuum pump vent
10
Vacuum chamber
Scope of delivery
1 Vacuum Sealer
1 Spare seal
1 Starterpack
1 Operating instructions
Before rst use
Remove all packaging material before rst
use.
Remove the transport securing device
from the vacuum chamber
10
. Carefully
read the notes in the quick start guide and
keep this in a safe place.
English
To Next Page
Loading...
