Need help?Do you have a question about the Peachtree NOVA and is the answer not in the manual?
General| Signal-to-Noise Ratio | >100dB |
|---|---|
| Type | Integrated Amplifier |
| Power Output | 80W per channel (8 ohms) |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Total Harmonic Distortion | <0.1% |
| Inputs | RCA, USB, Optical, Coaxial |
| Outputs | Pre-amp |
Comprehensive safety guidelines for operating and maintaining the audio product.
Instructions for unpacking, keeping sales receipts, and registering the product.
Details compatibility with Apple devices and legal/trademark information.
Introduces the nova's design philosophy and its integrated audio components.
Details the main power switch, AC input socket, and fuse holder location.
Covers antenna, IR input, 12V trigger output, service port, and USB-A input.
Describes USB-B, Coax, and Optical digital inputs on the rear panel.
Details preamp outputs, loop connections, and analog/phono inputs.
Explains the ground connection and speaker binding posts for audio output.
Describes buttons for selecting various audio inputs like USB, Coax, and AUX.
Details the IR receiver window and the AUX-2/PHONO input selection button.
Explains the Wi-Fi button, loop status LED, and the volume knob operation.
Details the 1/4" headphone jack and its automatic muting functionality.
Covers the standby, volume adjustment, and LED dimming controls on the remote.
Explains transport controls for USB playback and selection of USB inputs.
Describes buttons for selecting AUX, PHONO, COAX, OPT, and Wi-Fi inputs.
Details the mute button and the loop engagement/disengagement button.
Guides on integrating the nova with home theater systems via HTB input.
Instructions for enabling volume control bypass mode for digital sources.
How to connect and use an external audio processor with the loop input/output.
Step-by-step guide for PC and Mac users to connect and configure the nova via USB.
Tips for sound quality, ventilation, and highlights the product's environmental features.
Solutions for problems like the unit not powering on or having no sound.
Addresses issues with remote control, USB signals, and audio noise or pops.
Details the international warranty period and terms for the product.
Explains how to initiate and conduct product repairs, including obtaining an RA number.
Technical data for speaker output, including power and impedance ratings.
Specifications for preamp and headphone outputs, covering power, impedance, and signal quality.
Details supported formats and levels for USB, Coax, Optical, AUX, and Phono inputs.
Technical details on loop functionality, AC power consumption, fuse, and physical dimensions.
To Next Page
