EasyManua.ls Logo

Peak PKC0AJ - Troubleshooting; Limited Warranty; To Obtain Service

Peak PKC0AJ
8 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
TROUBLESHOOTING
Problem Situation Action
Low output
voltage
Inverter is overloaded Do not exceed maximum load rating for the Inverter.
Input voltage is below
10.5 volts
Keep input voltage above 10.5 volts to maintain regulation.
Low battery
alarm on all the
time
Poor battery condition
with low input voltage
Replace battery.
Inadequate power or
excessive voltage drops
Check conditions of power plug and 12-volt cigarette lighter/
accessory socket. Clean or replace as necessary.
No power
output
Inverter not fully
warmed up
Turn the Inverter power switch off and then on again until
the Inverter powers your appliances. Repeat as necessary
to get your appliance started.
12-volt cigarette lighter/
accessory socket needs
ignition to be on
Turn ignition to ACC position.
Battery voltage below
10 volts
Recharge or replace battery.
Equipment being
operated draws too
much power
Reduce load; DO NOT exceed maximum rating for the
Inverter.
Inverter in thermal
shutdown condition
Allow Inverter to cool down. Ensure there is adequate
ventilation around the Inverter. Ensure that load is no more
than its maximum rating for continuous operation.
LIMITED WARRANTY
Manufacturer warrants to the original consumer, or purchaser, that the PEAK® PKC0AJ/PKC0CJ
400 Watt Power Inverter will be free from defects in material and workmanship for ninety (90) days
from the date of sale to the original purchaser. Manufacturer hereby excludes and disclaims any and
all other warranties, expressed or implied, beyond those warranties specifi ed above. Manufacturer
excludes any implied warranty of merchantability or fi tness for a particular purpose.
IF YOUR PEAK® POWER INVERTER MALFUNCTIONS DUE TO A DEFECT IN MATERIALS AND
WORKMANSHIP WITHIN THE NINETY (90) DAY WARRANTY PERIOD, MANUFACTURER WILL,
AT ITS ELECTION REPAIR OR REPLACE IT. MANUFACTURER SHALL NOT, HOWEVER, BE
RESPONSIBLE FOR ANY DAMAGE TO YOUR PRODUCT DUE TO ANY CAUSE OTHER THAN
DEFECTS IN MATERIAL OR WORKMANSHIP, INCLUDING WITHOUT LIMITATION: FAILURE TO
FOLLOW INSTRUCTIONS FOR USE; MISUSE; REPAIRS BY AN UNAUTHORIZED PERSON;
MISHANDLING; MODIFICATIONS; NORMAL WEAR AND TEAR; ACCIDENT OR OVERLOAD.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. MANUFACTURER SHALL NOT BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES FOR BREACH OF ANY EXPRESSED
OR IMPLIED WARRANTY ON THIS PRODUCT OR BASED ON ANY OTHER CAUSE OR CLAIM.
To Obtain Service:
Before returning this product for any reason, please call toll free (800) 477-5847.
1.
Do not return your PEAK® product to the place of purchase for service. Send your unit, postage 2.
prepaid and insured, along with a copy of the original sales receipt and a phone number to the
address below. Pack your unit properly, as we are not responsible for any damage caused during
shipping.
Old World Industries, Inc.
c/o Technical Services
4065 Commercial Avenue
Northbrook, IL 60062
A copy of the original receipt is required for warranty service. If no receipt is provided, the unit 3.
manufacturer date will be used as the date of purchase.
© 2008 Old World Industries, Inc., Northbrook, IL 60062
MADE IN CHINA
www.oldworldind.com

Related product manuals