Instructions
MHP3112
Product Specifications
Dimensions: 5.4*1.8*3 inch / 13.8*4.7*7.8CM
G Weight: 0.4lb./0.18KG
Clock Inaccuracy: ±3 seconds/month (in normal temperature)
Power supply: 3 PCS 1.5V AAA alkaline batteries (Not included)
Tips: for better performance, replace batteries every 6 months.
Getting Started
Remove the battery compartment cover from the back of the unit. Properly align and insert 3
AAA alkaline batteries, replace cover.
Tips: Place the cord at the bottom of the batteries. The placement of the cord is to gain easy
access to remove batteries when replacing.
Setting Clock Time
1. Toggle setting mode switch to TIME SET position.
2. The factory default time of AM 12:00 starts to blink.
3. Set current time with HOUR and MIN buttons.
4. When the current time is displayed, toggle setting model switch to LOCK position. The
current time display will stop blinking.
Tips：When you set the minute with MIN button, the seconds’ timer re-sets to zero.
Setting Clock Date
1. Toggle setting model switch to DATE SET position.
2. The factory default date of 1/1/2015 starts to blink.
3. Set today’s date with MONTH, DATE and YEAR buttons.
4. When today’s date is displayed, toggle setting model switch to LOCK position. The today’s
date display will stop blinking.
Tips: You don’t have to set the day of the week, it will auto-match with the date.
Setting Alarm
1. Toggle setting mode switch to AL.SET position.
2. The symbol of alarm 1 displays on the right of current time. The factory default alarm 1
time of AM 6:00 starts to blink.
3. Set alarm 1 with HOUR and MIN buttons.
4. When your desired alarm 1 time is displayed, press ALARM button to turn on alarm 1 while
“ON” starts to blink.
5. Press HOUR button to independently control alarm 1 time between “OFF” and “ON”.
6. Press ALARM button to enter alarm 2 time settings. The symbol of alarm 2 displays on
To Next Page
Need help?
General
