Peakeep MHP3235 User Manual

PEAKEEP Night Light Digital Alarm Clock
User Manual
(MHP3235)
Getting Started
1. Remove the battery compartment cover, located at the lower right corner of
the back, properly align and insert 2* AAA (1.5V) batteries (not included the
box) following the +/- in the battery compartment, replace cover.
2. Connect the provided adapter to the DC 5V power jack of this unit, and plug
the adapter into an AC power outlet.
Note:
1. Backup batteries maintain date, time and alarm settings, however, they do not
power the display, nor trigger the alarm during power interruptions.
2. For better performance, replace batteries every 6 months. When you replace
the batteries, do not disconnect AC plug from AC outlet, otherwise current time
and alarm will be initialized.
3. Dispose of used battery promptly, keep the battery out of the reach of children.
Set Date and Time
Press and hold the [SET] button for 2 seconds, located on the back of the clock,
to enter the date and time SET MODE. Once in date and time SET MODE the
preference you are currently setting will blink on the clock.
To adjust the currently selected (flashing) item, press and release the “ +” or “ -
“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button to adjust the next
preference. The preference set order is as follows:
CALENDAR YEAR
CALENDAR MONTH
CALENDAR DAY
CLOCK HOUR

Peakeep MHP3235 Specifications

General

Display Type	LED
Color	Black
Batteries	2 AA batteries required. (included)
Special Features	Snooze function, adjustable brightness
Alarm Settings	Dual Alarm
Power Source	Battery Powered

Summary

Getting Started Guide

Date and Time Configuration

Alarm System Management

Set Alarm Configuration

Instructions for entering alarm set mode and adjusting hour and minute.

Turn Alarm On/Off

Controls the primary alarm function and its visual indicator on the screen.

Snooze Mode Operation

Pauses the alarm for 9 minutes and displays a snooze indicator.

Alarm Volume Adjustment

Adjusts the alarm sound volume between high and low settings.

Clock Display and Time Features

Display Dimmer Control

Adjusts the brightness of the main display from 0% to 100%.

Night Light Functionality

Toggles the night light on/off and adjusts its brightness.

USB Charging Port Usage

Provides a USB port for charging external devices like cellphones.

Time Format Conversion

Switches the time display format between 12-hour and 24-hour modes.

Safety and Maintenance Advice

Troubleshooting and Support

Date Matching Issues

Ensures correct year and date setting for accurate day of the week display.

Night Light Control

Addresses issues with turning off the night light completely via the dimmer.

Power Outage Resetting

Ensures battery backup is installed to prevent clock resets during power outages.

Service and Contact Information

Provides contact details for troubleshooting, replacement, or refund inquiries.