Peakeep MHP-3112 User Manual

ALARM MIN HOUR
YEAR 12/24
DATE/ C/ F MONTH
ON
OFF
SENSOR
LOCK
AL.SET
DATESET
TIMESET
MON-TO -FRI
MON-TO -SAT
AL.ON
AL.OFF
K1
K6 K7
K2 K3 K4 K5
Dimensions: 5.4*1.8*3 inch / 13.8*4.7*7.8CM
G Weight: 0.4lb./0.18KG
Clock Inaccuracy: ±3 seconds/month (in normal temperature)
Power supply: 3 PCS 1.5V AAA alkaline batteries (Not included)
Tips: for better performance, replace batteries every 6 months.
Instructions
MHP 3112
K1-Alarm switch(4 modes)
K2-Year setting
-Military Time/ Regular Time converting
K3-Minute setting
-Date setting
-Celsius/Fahrenheit converting
K4-Hour setting
-Month setting
K5-Setting mode switch
K6-Sensor switch
K7-Battery compartment
Product Specifications
1. Remove the battery compartment cover from the back of the unit, place the cord on the bottom of the battery
to gain easy access to remove batteries when replacing. Show as “FIG 1”
Getting Started
ALARM MIN HOUR
YEAR 12/24
DATE/ C/ F MONTH
ON
OFF
SENSOR
LOCK
AL.SET
DATESET
TIMESET
MON-T O -FRI
MON-T O -SAT
AL.ON
AL.OFF
AAA
FIG 1
2. Properly align and insert 3 AAA alkaline batteries, replace cover.
Setting Clock Time
1. Toggle setting mode switch to TIME SET position.
2. The factory default time of AM 12:00 starts to blink. Refer to the circled portion of “FIG 2”.
1/5

Peakeep MHP-3112 Specifications

General

Brand	Peakeep
Model	MHP-3112
Category	Alarm Clock
Language	English

Summary

Product Specifications

Getting Started

Battery Compartment Access

Instructions for removing the battery compartment cover for easier battery access.

Battery Installation

Procedure for properly aligning and inserting AAA alkaline batteries and replacing the cover.

Setting Clock Time

Initiating Time Setting

Steps to begin setting the clock time by toggling the mode switch.

Adjusting and Locking Time

Setting the current hour and minute, then locking the time display.

Setting Clock Date

Initiating Date Setting

Steps to begin setting the date by toggling the mode switch to DATE SET.

Adjusting and Locking Date

Setting the current month, day, and year, then locking the date display.

Setting Alarm

Setting Alarm 1

Procedure to set the first alarm time and enable/disable it.

Setting Alarm 2

Procedure to set the second alarm time and enable/disable it.

Selecting Alarm Mode

Daily Alarm Mode

Setting the alarm to sound every day.

Weekday and Weekend Alarm Modes

Setting alarms for Monday-Saturday or Monday-Friday.

Turning Alarm Off

Alarm Snooze and Dismissal

Options for temporarily suspending or permanently turning off the alarm.

Light Function

Temporary Backlight

Activating the clock's high backlight for 5 seconds.

Smart Nightlight

Enabling a low glow in the dark via the sensor switch.

Time Format Conversion

Regular vs. Military Time

Converting between 12-hour (AM/PM) and 24-hour (Military) time formats.

Temperature Unit Conversion

Switching between Celsius (°C) and Fahrenheit (°F) temperature units.

Troubleshooting

Clock Display Issues

Checking battery placement and power for display problems.

Date and Day of Week Mismatch

Ensuring the correct year is set for accurate day-of-week matching.

Alarm Malfunctions

Verifying setting mode lock, alarm symbols, and AM/PM selection.