EasyManua.ls Logo

Peakeep MHP3132 - Manual Station Search and Presets; Listen to Preset Stations; Adjust Volume; Turning Radio Off

Default Icon
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
enter it as a preset. Station frequency will display for few seconds. Same procedures apply for the next strong station. The unit
can store up to 10 strong signal stations per band.
Manual station search and manual preset store
With the radio on, tap the T+ (Tune +) or the T- (Tune -) buttons. The unit will increase or decrease the frequency incrementally
with each tap. When a desired station is found, press and hold the M+ button, the next preset number will blink on the display.
Press the M+ button to enter it as a preset. Station frequency will display for few seconds. Same procedures apply for other
strong stations.
Listen to Preset Stations
With the radio on, press M+ button to your desired station. The preset number and station frequency will be briefly displayed.
Adjust Volume
With the radio on, press the V+ (Volume +) or V- (Volume -) buttons to adjust the volume level (00 16). The selected volume
will be briefly displayed.
Turning Radio off
Press and hold the On/Off button for more than 2 seconds.
Radio Reception
Uncoil the antenna completely for best reception. Taping the uncoiled antenna to a wall may improve reception.
Sleep Function
With the radio on, press the Snooze/Sleep button repeatedly to select between 90 and 10 minutes (in 10 minute increments)
of listening time. The radio will turn off after the specified time interval.
Troubleshooting
We offer 180 days unlimited warranty. If you encounter problems using this unit, check the following points, request service at
sales@us-myehome.com, or contact Amazon Customer Service before leaving a feedback/review. It is our intent to ensure all
problems are resolved.
No power
Ensure power plug is connected properly
Check that there is power to the outlet
Unplug and plug the unit back in
No Sound
Adjust the volume
Poor radio reception
Move the unit away from TV or VCR
Fully extend the antenna
Alarm does not work
Ensure alarm indicator light is on.
Alarm goes off at midnight
Change the alarm time (Factory default is 12:00 AM)
Ensure alarm indicator lights are off
Single Alarm Function
Disable/Cancel one set alarm
Thank you for your purchase. Have a wonderful day!
US MyeHome LLC

Related product manuals