3. General Characteristics
Oscilloscope
2 in 1 (Multimeter function support);
Record length of 6,000 points for each channel;
Reading-out with the cursor;
Eighteen automatic measurement functions;
Autoscale function;
Color liquid crystal display of high resolution and high contrast with adjustable back light;
Storage and call-out of waveforms;
Automatic setting function provided capable of fast setting;
FFT function
Implementation of detecting the average and peak values of the waveform;
Edge and video triggering function;
RS232 or USB communication ports;
Multiple Language User Interface.
Multimeter
3 and 3/4 digits;
Volts, Amps, Ohms, Diode, Capacitance, Continuity measurement;
10A maximum amplitude;
Isolated inputs between oscilloscope and multimeter.
3.1. Performing the General Inspection
When you have got a new PeakTech oscilloscope, it is suggested that you should perform a general inspection on the
instrument according to the following steps.
3.2. Check whether there is any Damage on it Due to Transportation
If the packing boxes or foam cushions are found in serious damage, keep them in a proper place till the complete
instrument and accessories have passed the electrical and mechanical tests.
3.3. Make a Check on Accessories
The accessory list has been described in the picture of Digital Oscilloscope Parts of this manual. You can make a check
and find whether there is any accessory loss with reference to the Appendix. In case of any accessory loss or damage,
consult the distributor responsible for such a business.
3.4. Make a Check on the Complete Instrument
If the instrument is damaged in its appearance or it fails in normal operation or performance test, consult the distributor
responsible for such a business. If the instrument is damaged due to transportation, keep the packing in a proper place and
consult the transportation department and the distributor responsible for such business for providing an instrument
replacement or maintenance.
-68-
To Next Page
Loading...
