PeakTech 1220 - Page 70

4. Input Connections
4.1. Input Connections
Figure 2
Description
1
The power adapter is supplied for AC power supply and battery recharging
2
Multimeter test lead
3
Multimeter input jacks, including three circular banana jacks and two square jacks.
The three circular jacks are used for voltage, current and resistance inputs, while the two square jacks are used
for capacitance inputs
4
Oscilloscope probe
5
Oscilloscope channel input
6
The output terminal of 1KHz/5V square-wave test signal
-69-