PeakTech 1220 - Page 83

6. Using the Multimeter
6.1. Making Meter Connections
Use the four 4-mm safety banana jack inputs for the Meter functions: COM, V/, mA, 10A
See figure 2 on page 69 for the connections.
6.2. Multimeter Operation Window
Figure 16: Multimeter Operation Window
1
Low Battery indication
2
Manual/Auto range indicators, among which the MANUAL means measuring range in manual operation mode and
Auto refers to the measuring range in automatic operation mode.
3
Measurement mode indicators: (DCV, ACV, DCA, ACA, W, Diode, , C)
4
The relative magnitude measurement indicator.
5
RUN/STOP switchover
6
The reference value of the relative magnitude measurement.
7
Display the multiplier for analog display
8
The digital reading of measurement
9
Automatic control measuring range.
10
Absolute/ relative magnitude measuring control
11
Manual measurement control.
12
Scale of analogue display
-82-