PeakTech 3445 - Page 53

4.3. Understanding the Rotary Switch
Select a primary measurement function by positioning the rotary
switch to one of the icons around its perimeter. For each function,
the Meter presents a standard display for that function (range,
measurement units, and modifiers). Button choices made in one
function do not carry over into another function.
V~
AC voltage measurements
V–
DC and AC+DC voltage measurements
mV
DC/AC milli-volts measurements
 / / CAP
Resistance, Diode test, capacitance and
continuity measurements
Hz%
Frequency measurements
TEMP
Temperature measurements
A
AC/DC amps measurements
mA
AC/DC milliamps measurements
µA
AC/DC microampere measurements
LowZ (P3445 only)
Low Impedance measurement for DCV / ACV
-52-