Need help?Do you have a question about the Peavey 115 TF and is the answer not in the manual?
Specifies the on-axis frequency response measured at 1 meter in an anechoic environment.
Indicates the -3 dB point for the low-frequency response.
Defines the -10 dB point for the usable low-frequency range.
Details continuous, program, and peak power handling capabilities.
Measures sound pressure level at 1 meter with 2.8V input in an anechoic environment.
Specifies the maximum achievable sound pressure level at 1 meter.
Details the measured radiation angles at the -6 dB polar response points.
Provides mean directivity factor Q and index D, indicating beamwidth.
Lists the drivers used: one 15" woofer and one compression driver.
Specifies the resonant frequency of the enclosure's port tuning.
Presents harmonic distortion levels at different power levels and frequencies.
States the internal passive crossover frequency for the two-way system.
Details the nominal and minimum impedance of the loudspeaker system.
Identifies the type of input connectors used on the enclosure.
Describes the plywood construction and off-white textured paint finish.
Explains the eight mounting points for symmetrical suspension.
Provides the physical dimensions of the enclosure in inches and centimeters.
States the net weight of the loudspeaker system in pounds and kilograms.
Lists the main components and design aspects of the loudspeaker.
Details the redesign, system components, and trapezoidal enclosure benefits.
Graphical representation of the on-axis amplitude response from 20 Hz to 20 kHz.
Graphical representation of the impedance curve from 20 Hz to 20 kHz.
Graphs showing horizontal and vertical beamwidth coverage angles.
Graphs illustrating the directivity factor (Q) and index (D).
Details the modified AES standard used for power handling ratings.
Graphs showing 2nd and 3rd harmonic distortion vs. frequency at different power levels.
Provides safety warnings and guidelines for suspending the speaker.
Summarizes key electrical, physical, and performance specs for installation.
Details the warranty coverage, limitations, and customer service contact.
Graphical representation of the horizontal dispersion patterns at various frequencies.
Graphical representation of horizontal dispersion patterns at higher frequencies.
Graphical representation of the vertical dispersion patterns at various frequencies.
Graphical representation of vertical dispersion patterns at higher frequencies.
Technical drawing showing the location of flying points on the enclosure.
Includes copyright, model number, company details, and printing date.
To Next Page
General
