Need help?Do you have a question about the Peavey Prosys 112HC and is the answer not in the manual?
General| Type | 2-way full-range |
|---|---|
| Impedance | 8 Ohms |
| Nominal Coverage | 90° x 40° |
| Sensitivity | 98 dB SPL (1W/1m) |
| Woofer | 12" woofer |
| Tweeter | 1.4" titanium diaphragm compression driver |
| Frequency Response | 65 Hz to 18 kHz (+/- 3dB) |
| Input Connections | 2 x 1/4" jacks, 2 x Speakon NL4 |
Frequency response from 52 Hz to 18 kHz measured at 1 meter in an anechoic environment.
Defines the low-frequency performance, with a -3 dB point at 52 Hz.
Indicates the usable low-frequency range, noted at a -10 dB point of 46 Hz.
Features 150 watts RMS continuous built-in amplifier power with 0.5 volt RMS input sensitivity.
Measures 96 dB SPL (1W @ 1m) in an anechoic environment with a swept sine input.
Achieves a maximum sound pressure level of 116 dB when driven with music.
Details horizontal and vertical radiation angles at -6 dB points across different frequency bands.
Provides Directivity Factor Q and Directivity Index Di median values for 500 Hz-16 kHz.
Comprises one 12" woofer, one 6.5" midrange driver, and a 90°x40° dynamic horn tweeter.
Features a tuning frequency of 55 Hz and crossover frequencies at 450 Hz and 5 kHz.
Nominal impedance is 4 ohms, with a minimum of 3.2 ohms (no external system access).
Offers two 1/4" phone jacks and male/female XLR connectors in parallel, balanced input.
Constructed of high-density plywood, internally braced, covered in carpet with a metal grille.
Includes SA-1 stand adaptor, rubber feet, and dimensions of 24"H x 17.4"W x 13"D.
The unit has a net weight of 61 lbs.
Input impedance is greater than 100K ohms with CMRR greater than 40 dB @ 120 Hz.
Features 10 Hz-40 kHz frequency response, 40 V/US slew rate, and 200 damping factor.
Self-contained system with volume control, balanced line inputs, and DDT™ compression.
To Next Page
