EasyManua.ls Logo

Peavey Classic 20 MH User Manual

Peavey Classic 20 MH
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.peavey.com
Classic 20 MH
®
20W Tube Guitar Amplier
Operating
Manual
Question and Answer IconNeed help?

Do you have a question about the Peavey Classic 20 MH and is the answer not in the manual?

Peavey Classic 20 MH Specifications

General IconGeneral
Power Output20 Watts
Channels2 (Clean and Lead)
Preamp Tubes3 x 12AX7
Power Tubes2 x EL84
ReverbYes
Effects LoopYes
USBNo
TypeTube Amplifier
EQBass, Middle, Treble
FootswitchOptional (for channel switching)
Inputs1 x Instrument Input
Outputs1 x Speaker Output

Summary

Classic 20 MH Front Panel Controls

INPUT

Standard 1/4" jack for connection to the output of your guitar or last pedal.

VOLUME

Controls the volume and gain level of the clean channel.

CHANNEL SWITCH

Allows selection of the two different channels.

PRE-GAIN

Controls the input volume level of the lead channel and gain.

POST GAIN

Controls the output level when the lead channel is selected.

BASS, MIDDLE & TREBLE EQ Controls

Passive tone controls that regulate low, mid and high frequencies.

REVERB

Determines the overall reverb level.

Pilot Light

Illuminates when AC power is supplied and POWER SWITCH is set to ON.

OUTPUT TUBE STATUS INDICATION (T.S.I.™) LEDs

LEDs indicate status of output tubes, showing green or red based on operation.

Classic 20 MH Rear Panel Features

VOLTAGE SELECTOR SWITCH

Selects between two different AC line/mains voltages.

AC POWER INLET

Receptacle for an IEC line cord to provide AC power to the unit.

FUSE

Located within the cap of the fuseholder, must be replaced with the same type and value.

POWER OUTPUT SWITCH

Controls an attenuator for 100%, 25%, and 5% of rated power.

Classic 20 MH Specifications

Rated Power

20 W(rms) into 8 or 16Ω.

Power Consumption

(Domestic) 90 W, 50/60 Hz, 120 VAC.

Tube Complement

2 x EL84, 3 x 12AX7/ECC83.

Dimensions

7.25" x 14.00" x 7.75" / 185mm x 356mm x 197mm.

Weight

17 lbs / 8kg.

Preamp Specifications

Details on preamp input impedance and effects send/return.

Other Misc Specifications

Includes Signal to Noise Ratio, MSDI Output, USB Output.

Power attenuator

Three setting switch for 100%, 25% and 5% of rated power.

Headphone Output

Stereo mini-jack with filtered output for stereo headphones.

Peavey Electronics Corporation Limited Warranty

What This Warranty Covers

Details warranty coverage for defects in material and workmanship.

What This Warranty Does Not Cover

Excludes damage from accident, misuse, improper installation, or unauthorized service.

Who This Warranty Protects

States warranty applies only to the original purchaser.

How Long This Warranty Lasts

Specifies warranty duration based on product category.

What Peavey Will Do

Outlines Peavey's commitment to repair or replace covered products.

How To Get Warranty Service

Provides instructions for obtaining warranty service.

Limitation of Implied Warranties

Limits duration of implied warranties to the length of this warranty.

Exclusions of Damages

Limits Peavey's liability for damages to repair or replacement.

Optional Product Extended Warranty Registration

Related product manuals