Need help?Do you have a question about the Peavey 6505 MH and is the answer not in the manual?
General| Preamp Tubes | 3 x 12AX7 |
|---|---|
| Power Tubes | 2 x EL84 |
| Effects Loop | Yes |
| Reverb | No |
| USB | No |
| Power Output | 20W / 5W / 1W |
| Channels | 2 (Rhythm & Lead) |
| EQ Controls | 3-band EQ |
| Inputs | 1 x 1/4" |
| Weight | 16 lbs |
Device compliance with FCC/ICES rules and conditions for operation.
Warnings about modification, installation, and radiation exposure limits.
General description of the 6505 MH amplifier, its heritage, and target audience.
Comprehensive list of the amplifier's main features and capabilities.
Critical instructions for proper airflow and heat dissipation to prevent damage.
Details on Input, Channel Switch, Rhythm Pre-Gain, BRT, CRCH, Lead Pre-Gain, and EQ controls.
Explanation of Post-Gain, Reverb, Resonance, and Presence controls for tone shaping.
T.S.I. LEDs, Standby switch, and Power switch operation with startup sequence.
AC power inlet, voltage selector, fuse, and safety notes.
Impedance selector, speaker output, speaker defeat, and headphone output connections.
MSDI, ground lift, and effects loop send/return ports.
Footswitch jacks for remote control and USB audio record output.
Rated power, consumption, tube complement, dimensions, and weight.
Preamp, effects loop, MSDI, USB, and headphone output parameters.
Details on equalization, power attenuator, and footswitch functionality.
Details on what the warranty covers, what it excludes, and who it protects.
Information on warranty periods and how to obtain service.
Legal limitations on implied warranties and customer rights.
To Next Page
