Need help?Do you have a question about the Peavey Audition and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Controls | Volume, Tone |
| Headphone Jack | Yes |
| Inputs | 1 x 1/4 inch (Instrument) |
| Type | Solid State |
| Power Output | 20 Watts RMS |
| Speaker | 8 inch |
Details permissible noise exposure limits based on duration and sound level as specified by OSHA.
Connects your guitar to the amplifier for sound input.
Adjusts the overall sound level of the amplifier.
Switches between clean and distorted sound modes.
Adjusts the high-frequency tone for the guitar.
Adjusts the low-frequency tone for a fuller sound.
Allows connection of headphones, disabling the speaker.
Indicates when the amplifier is powered on.
Applies power to the unit, switching it on or off.
Specifies the amplifier's output power rating (7 W(rms) into 8 Ω).
Provides the physical dimensions of the amplifier (H x W x D).
Indicates the amplifier's weight (6.4 lbs / 2.9 kg).
Details what material and workmanship defects are covered by the warranty.
Lists exclusions from warranty coverage, such as damage from misuse or unauthorized service.
Specifies the duration of the warranty based on product category.
Provides instructions on how to obtain warranty repairs or replacements.
Limits the duration of implied warranties like merchantability and fitness for a particular purpose.
Limits Peavey's liability for damages beyond product repair or replacement.
To Next Page
