8
HIGH GAIN INPUT
Used for most electric guitars. The High Gain Input is 6 dB louder than the Low Gain Input (2).
LOW GAIN INPUT
Provided for instruments with extremely high outputs, which can result in overdriving (distorting) the
High Gain Input (1). If both inputs are used simultaneously, their levels are both Low Gain.
VOLUME
This control sets the volume level for the Clean channel.
VINTAGE/CLASSIC/WARM SWITCH
The CLASSIC position maintains a standard voicing. The VINTAGE position changes the overall function
of the EQ and adds a hint of brightness to emulate classic amp designs. The WARM setting also recon-
gures the EQ and is provided for darker sounds. Experiment with this switch, along with Clean EQ (5)
adjustments, to capture your desired tone. Refer to page 12 for suggested settings.
CLEAN EQ
These passive tone controls regulate the low, mid, and high frequencies of the Clean channel.
CHANNEL SELECT SWITCH
The Channel Select Switch determines which channel, LEAD or CLEAN, is active. This switch must be in
the “LEAD” position in order for the footswitch to function.
PRE GAIN
The Pre Gain controls the input volume level of the Lead channel.
Front Panel
1
2
3
4
5
6
7
1
2
3
6
74 5
1 2
3
6
74 5
To Next Page
Loading...
Need help?
General
