Peavey Firebass 700 - Front Panel Controls and Features

3
E N G L I S H
Congratulations on your purchase of the Peavey FireBass
™
700. The FireBass includes an easy to-use,
three-band active EQ with shiftable mid-range control, a contour control (for that smiley-face EQ curve),
and a bright switch. These tone controls are so versatile you should be able to quickly dial up your own
sound.
Also provided are a buffered tuner send jack, a transformer balanced XLR line out with its own level control,
pre-post EQ switch, and a ground lift switch. The XLR output is before the master volume control, so you can
adjust your stage volume without affecting the send to the main sound system.
A -10 dB input pad switch (active/passive), footswitchable post-EQ effects loop, adjustable active crossover controls
for both frequency and balance, preamp output/power amp input patch points, and the DDT
™
enable/defeat switch
add to the list of professional features found in the FireBass 700.
For more information on operation and specifications we suggest that you spend a few minutes to look through
the manual. Enjoy!
Features:
• Top box design
• 700 watts into 2 Ω, 475 watts
into 4 Ω, 275 watts into 8 Ω
• 3-band active EQ with shiftable
mid-range control
• Contour control
• -10 dB Pad switch
• Active crossover with variable
frequency and balance controls
• Buffered tuner send jack
• Footswitchable post-EQ effects loop
• Transformer balanced XLR jack
• Pre-/Post-EQ send switch for XLR jack
• Ground lift switch for XLR jack
• DDT
™
power amp compression
with defeat switch
• Preamp out/power amp in jacks
FRONT PANEL
1
2
4 5 6 7 8 9 10
22 23 11
26
1921
20
2524171618151412133