Need help?Do you have a question about the Peavey Impulse 100 and is the answer not in the manual?
General| Frequency Response | 65 Hz - 18 kHz |
|---|---|
| Impedance | 8 ohms |
| Woofer Size | 10 inch |
| Nominal dispersion | 90° x 40° |
| Inputs | 1/4 inch |
| Type | Two-way PA loudspeaker |
| Tweeter | 1.4-inch titanium compression driver |
Details the two-way, full-range speaker system engineered for ultra-high performance in a compact package.
Describes the high-impact polypropylene enclosure, 10" woofer, and 1.4" titanium compression driver.
Explains the dual 1/4" phone jacks, Sound Guard™ II protection, and advanced topology crossover.
Specifies measurement at 1-meter with 1-watt swept-sine input, yielding 74 Hz to 18 kHz response.
Details beamwidth from -6 dB points, Q, and Directivity Index for optimal placement in sound reinforcement.
Explains EIA RS-426A rating and in-house tests, requiring 3 dB amplifier headroom for reliability.
Presents harmonic distortion plotted against frequency at 1% and 10% of rated power.
Warns against improper suspension, requiring certified engineers and correct hardware for safety.
Lists bandwidth, output level, impedance, power handling, radiation geometry, dimensions, and weight.
To Next Page
