Peavey Impulse 200

Defines the speaker's operational frequency range and cutoff points.

Details continuous/peak power ratings and sound pressure level capabilities.

Lists driver components and crossover design parameters.

Describes the speaker's sound dispersion patterns horizontally and vertically.

Highlights major features like power, driver types, and protection systems.

Details the two-way system, enclosure materials, driver specifics, and crossover design.

Explains how the speaker achieves its smooth frequency response from 78 Hz to 18 kHz.

Details the testing methodology for power handling ratings, including signal type and headroom.

Summarizes key performance metrics like bandwidth, SPL, impedance, and radiation geometry.

Explains how directivity parameters are derived from polar plots for placement insights.

Illustrates sound dispersion in the horizontal plane at various frequencies.

Illustrates sound dispersion in the vertical plane at various frequencies.

Graph showing speaker output level across frequencies at 1W on-axis.

Graph showing speaker impedance variation across frequencies.

Graph showing horizontal and vertical beamwidth changes with frequency.

Graph showing directivity factor (Q) and index (Di) across frequencies.

Advises on proper stand placement for maximum stability with the speaker.

Warns against direct cone exposure to sunlight and rain for permanent outdoor use.

Provides information on the one-year limited warranty and how to obtain details.