EasyManua.ls Logo

Peavey Impulse 500 - Page 11

Peavey Impulse 500
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Enclosure:
Peavey Impulse
®
500P Subwoofer (domestic)
Frequency Response:
45 Hz to 150 Hz
Low Frequency Limit (-3 dB point):
45 Hz
Useable Low Frequency Limit (-10 dB point):
36 Hz
Internal Power Amplifiers (@120 VAC line):
600 watts peak dynamic power, 300 watts continuous
RMS at clipping
Nominal Sensitivity (2.83V @ 1M, swept sine input
in anechoic environment):
98 dB
Maximum Sound Pressure Level:
124 dB music peak
Transducer Compliment:
Model 1568 15" Black Widow
®
weather-resistant woofer
Box Tuning Frequency (Fbox):
44 Hz
Electrical Crossover Frequency (High Pass
Output):
150 Hz
Crossover Type:
Internal electronic two-way crossover with active bass
boost and subsonic filtering
Crossover Slopes:
18 dB/octave (3rd order) low pass, 18 dB/octave (3rd
order) high pass, staggered poles
Electronic Input Impedance (Nominal):
Greater than 50 kohms, balanced or unbalanced
Input Connections:
One combo female XLR/ 1/4" phone jack and one male
XLR and one 1/4" phone jack connector all providing
balanced operation, in parallel
Enclosure Materials and Finish:
Injection-molded high-impact polypropylene of a nominal
thickness of 1/4" and with textured finish, having a UL
flame-rating
Mounting:
Stand mounting on 1 3/8" diameter stands via molded-in
mount, flying via Peavey Versamount
70 (top or bottom
of cabinet) and four rubber feet for floor use
Dimensions:
28.562" (72.55 cm) tall by 21.312" (54.13 cm) wide
(11.5" {29.21 cm} wide in rear) by 17" (43.18 cm) deep
Optional Accessories:
Impulse
®
500 Stacking Adapter
Impulse
®
500 Array Bracket
Net Weight:
62 lbs.
Shipping Weight:
72 lbs.
Additional Remarks:
Also available as a passive unit Impulse
®
500 Subwoofer,
4 ohm
AMPLIFIER SPECIFICATIONS
Nominal Amplifier Frequency Response:
+0, -1 dB 10 Hz to 30 kHz
THD and IM:
Typically less than 0.2 %
Damping Factor:
Greater than 100 @ 1000 Hz, 8 ohms
Hum and Noise:
Greater than 95 dB below rated power
DDT Dynamic Range:
Greater than 26 dB
Power requirements of Impulse
®
500P Subwoofer
System (domestic):
500 watts, 120VAC,
60 Hz
11
IMPULSE
®
500P SUB SPECIFICATIONS
Subject to change without notice.

Related product manuals