PEAVEY ELECTRONICS
Peavey Lo Max
®
18
00560400
Peavey Lo Max
®
15
00560290
Finally, there’s a subwoofer
driver that just might be stronger
than your biggest amplier. With
an almost inconceivable power
handling capacity of 2400 watts
program, the Lo Max has more
real world power handling than any
other commercially available sound
reinforcement loudspeaker. A no
compromise design combines this
power capacity with high efciency,
excellent frequency response and
low distortion for revolutionary
performance. It even works well in
compact enclosures.
DESIGN
The Lo Max utilizes the same strong
Kevlar
®
composite cone and dustcap
used in the Low Rider
®
series.
The cone is strong and tough, and
uses an innovative asymmetrical-M
surround for superior excursion and
motion control.
High quality gold on brass spring
plunger terminals accepting large
gauge wire are attached to large
diameter, high-current tinsel leads
with silver solder to withstand high
currents, high temperatures and long
excursion. The tinsel termination is
coated with an elastomer material to
improve ex life.
The massive 4” diameter voice coil
uses polyamide insulated copper
ribbon wire, edge wound and
bonded onto an incredibly durable
and heat resistant polyamide
composite former. With a winding
length of 1.150”, the long coil
has much more surface area to
dissipate heat, and its increased
length drives the cone to a far
higher excursion. The coil is over
coated with a tough thermoset
epoxy for added durability,
abrasion resistance and heat
dissipation.
The coil wires are solderless
diffusion welded to high
conductivity OFHC copper ribbon
To Next Page
Need help?
General
