Need help?Do you have a question about the Peavey Milestone and is the answer not in the manual?
Details on the neck's hard-rock maple construction, torsion rod, and headstock.
Information on body material, Naturalite™ shape, and rib-cage contour.
Describes high-output humbucking pickups, dual/single coil circuit, and shielding.
Explains tonal variations, toggle switch, and volume/tone control functions.
Details the two-position switch for pickup phasing.
Information on medium-heavy, high-crowned, 18% nickel silver fret wire.
Covers bridge, saddles, nut, tuning machines, and switches.
Feature to control playing angle and string clearance.
Specifies the full scale length and number of frets.
Regulates output level with minimal high-frequency loss.
Independent tone circuits for each pickup, enabling dual/single coil modes.
Three-position switch for selecting neck, bridge, or both pickups.
Two-position switch for reversing coil relationship in out-of-phase mode.
How tone controls enable single coil and humbucking tonalities.
Adjusts neck bow to prevent string buzzing.
Sets overall string playing height via neck angle.
Adjusts individual string height using bridge saddles.
Ensures pitch accuracy by adjusting string length at the bridge.
Protecting the instrument from environmental extremes.
Extending string life through cleaning and timely replacement.
Advice on protecting, cleaning, and shining the guitar's finish.
Instructions for cleaning the guitar case interior and exterior.
Balancing string tension and tremolo spring tension for optimal action.
Adjusting the tightness or looseness of the tremolo arm.
Procedure to disable the tremolo system for case storage or preference.
To Next Page
General
