Need help?Do you have a question about the Peavey MP 600 and is the answer not in the manual?
General| Channels | 6 |
|---|---|
| Phantom Power | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | <0.1% |
| USB Interface | No |
| Inputs | 6 XLR, RCA |
| Outputs | RCA |
| EQ Bands | 3 |
Essential safety guidelines for operating the equipment safely.
List of the main features and capabilities of the MP 600 mixer.
Details on power supply, switch, fuse replacement, and AC cord.
Information on the parallel 1/4" speaker output jacks.
Description of controls for channels 1-6: MIC/LINE INPUT, GAIN, REVERB, EQ.
Specific inputs for Channel 7, including RCA and 1/4" stereo sources.
Details on the RCA output jacks for tape recording.
Operation of the reverb footswitch and the effects output jack.
Description of the main output and master level/reverb controls.
Information on the power LED and the master equalization controls.
Detailed technical data for each input channel's performance and levels.
Technical data for the master section, output levels, and power amplifier.
Details on warranty coverage, exclusions, and how to obtain service.
To Next Page
