EasyManua.ls Logo

Peavey MD-III

Peavey MD-III
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNERS
MANUAL
A
A
Intended
to
alert
the
user
to
the
presence
of
uninsulated
“dangerous
voltage’
within
the
product’s
enclosure
that
may
be
ot
sufficient
magnitude
to
constitute
a
risk
of
electric
shock
to
persons.
Intended
to
alert
the
user
to
the
presence
of
important
operating
and
maintenance
(servicing)
instructions
in
the
literature
accom¬
panying
the
product.
CAUTION:
Risks
of
electrical
shock
—
DO
NOT
OPEN
CAUTION:
To
reduce
the
risk
of
electric
shock,
do
not
remove
cover.
No
user
serviceable
parts
inside.
Refer
Servicing
to
qualified
service
personnel.
1
WARNING:
TO
PREVENT
ELECTRICAL
SHOCK
OR
FIRE
HAZARD,
DO
NOT
EXPOSE
THIS
APPLIANCE
TO
RAIN
OR
MOISTURE.
BEFORE
USING
THIS
APPLIANCE,
READ
THE
OPERATING
GUIDE
FOR
FURTHER
WARNINGS.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Peavey MD-III and is the answer not in the manual?

Peavey MD-III Specifications

General IconGeneral
BrandPeavey
ModelMD-III
CategoryMusic Mixer
LanguageEnglish

Summary

Channel Controls and Functions

Channel Gain Adjustment

Adjusts input gain for wide dynamic range, aided by LIMIT LED.

High Frequency Tone Control

Active tone control for high frequency boost or cut.

Mid Frequency Tone Control

Adjusts mid frequency boost/cut at a selected center frequency.

Low Frequency Tone Control

Active tone control for low frequency boost or cut.

Auxiliary Send Controls

Adjusts signal level sent from channel to AUX A, B, C, D, E, F mixes.

Auxiliary Send PrePost Switch

Selects PRE or POST EQ/Fader signal for AUX C and D sends.

Channel Panning

Assigns channel signal to Left, Right, or stereo image.

Channel Limit LED

Indicates when channel signal level is too high.

Channel Pre-Fader Listen (PFL)

Routes post EQ signal to headphones for cueing.

Channel Level Slider

Determines the overall level of the channel signal.

Master Section and Aux Returns

Auxiliary Return Section

Controls for routing signals back into the master mix.

Auxiliary Return Assignment

Assigns Aux A return signal to Aux A or Aux B mixes.

Auxiliary Return Level and Pan

Controls the level and stereo placement of effects returns.

Master Output Controls

Controls for overall mix level, headphone, and PFL signals.

Auxiliary Master Level Controls

Controls output level for each AUX mix.

Power and Lamp Indicators

Controls and indicators for power status and illumination.

Rear Panel Connections

Channel Patching and Input Jacks

Provides channel patching and various input connections.

Auxiliary Input and Output Jacks

Connects line signals to AUX mixes and outputs AUX mixes.

Master, Left, Right, and Return Jacks

Connects master mix outputs and auxiliaries returns.

Phantom Power and Line Cord

Controls phantom power and details the line cord connection.

Specifications and Diagrams

Technical Specifications

Detailed performance metrics for channels, inputs, outputs, and noise.

Block Diagram Explanation

Illustrates signal flow within the unit for functional understanding.

Warranty Information

Limited Warranty Terms

Details the one-year and 90-day limited warranties and remedies.

Warranty Conditions and Exclusions

Outlines conditions, exclusions, and limitations of the warranties.

Warranty Registration and Service

Instructions for warranty registration and obtaining service.

Related product manuals