Need help?Do you have a question about the Peavey MP 400 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Type | Powered Mixer |
| Power Output | 200W @ 4 Ohms |
| Inputs | 4 XLR |
| Outputs | 1/4" Line Out |
| Power Supply | AC |
| Weight | 8 kg |
Connects the power cord to the unit and emphasizes proper grounding.
Location and function of the power switch and indicator light.
Details on connecting speakers, including impedance warnings.
Balanced XLR input for microphones or low impedance sources with +15V phantom power.
Unbalanced 1/4" input for line-level sources; not usable simultaneously with XLR.
Adjusts the individual channel's volume within the mix.
Sets internal reverb level for each channel, affected by master reverb.
Shelving EQ for treble frequencies, used for noise reduction or brilliance.
Controls the overall volume level of the entire system.
Adjusts the amount of reverb audible in the main mix.
Provides ±15 dB equalization across Low, Mid, and High frequencies for tone control.
1/4" unbalanced output for external amplifiers, speaker systems, or tape decks.
Mono 1/4" output for connecting external effects devices.
Mono 1/4" input for line-level signals, bypassing reverb and EQ.
Connects to an optional footswitch to activate or defeat reverb remotely.
Details on input noise, frequency response, distortion, and impedance for each channel.
Covers Master EQ, output levels, headroom, impedance, noise, and signal-to-noise ratio.
Provides frequency response, rated power, load, and THD for the power amplifier.
Lists the voltage, frequency, and wattage requirements for operating the unit.
To Next Page
