Need help?Do you have a question about the Peavey Nashville 112 and is the answer not in the manual?
Essential safety guidelines for operating the amplifier, covering warnings and instructions.
Warning regarding high noise levels and the necessity for hearing protection during operation.
A step-by-step guide to quickly set up and start playing the amplifier.
Describes the guitar input jacks and the Pre Gain control for signal level.
Details the pre-EQ effects loop and equalization controls for tone shaping.
Explains the Presence control, post-EQ effects loop, and Master Reverb.
Covers the power switch, power amp input, and preamp output/CD input jacks.
Describes audio outputs (Line Out, Headphones) and the remote switch jack.
Recommended settings for achieving a fiddle-like tone.
Recommended settings for a clean lap steel guitar tone.
Recommended settings for E9th tuning steel guitar.
Recommended settings for C6th tuning steel guitar.
Details power output, frequency response, distortion, and preamp input/output specifications.
Covers EQ frequency ranges, levels, and system hum/noise levels.
Provides physical dimensions, weight, and footswitch functionality.
Details what the warranty covers, exclusions, and its duration.
Instructions on how to get warranty service from a dealer or by shipping.
Covers limitations on implied warranties and consumer rights.
To Next Page
General