Need help?Do you have a question about the Peavey Classic 50/50 and is the answer not in the manual?
General| Power Output | 50 watts per channel |
|---|---|
| Channels | 2 |
| Type | Tube |
| Inputs | 1 x 1/4" per channel |
| Outputs | 2 x 1/4" (left and right channels) |
| Impedance | 4, 8, 16 ohms |
| Controls | Volume, Presence |
| Footswitch | Yes |
| Rackmountable | Yes |
| Effects Loop | Yes |
| Footswitchable | Channel switching |
Alerts users to dangerous voltage and risks of electric shock. Do not open the unit.
Warns against exposing the appliance to rain or moisture to prevent fire hazard.
Describes the main power switch, power LED, and standby switches/LEDs for both channels.
Details level, resonance, and presence controls for Channel 1 and Channel 2.
Details speaker output jacks and impedance selector switches for both channels.
Explains mono/stereo switch and Channel 1 line output level control.
Covers input/output jacks, direct outputs, ground switch, and line cord.
Details fuse location, replacement, and safety for the power cord.
Details rated power, power @ clipping, frequency response, and hum & noise levels.
Provides specifications for input impedance, direct output, and line output.
Illustrates connecting the amplifier for mono and dual mono operation.
Diagrams for bi-amplification and stereo setups with various cabinets.
Covers one-year limited warranty on product and 90-day on tubes/meters, with exclusions.
Instructions for warranty registration, proof of purchase, and obtaining service.
Covers safe operation, handling power cords, ventilation, and maintenance warnings.
Details OSHA limits for noise exposure and the need for hearing protection.
To Next Page
