Peavey Bravo 112

Input for most electric guitars, offering 10 dB more gain than the Low Gain input.

For instruments with extremely high outputs, preventing overdrive on the High Gain input.

Adjusts the volume of the Normal channel, unaffected by the Post Gain control.

Selects between Lead or Normal channel; also controllable via remote footswitch.

Provides a preset boost (±8 dB) to treble frequencies when activated.

Passive tone controls for adjusting low, mid, and high frequencies respectively.

Controls Ultra channel input volume; pull to activate system-wide gain boost.

Controls the overall volume level of the Ultra channel.

Active control for low frequency boost or cut (±15 dB). Not functional on Normal channel.

Passive control for mid frequency cut (-15 dB). Functional only on the Lead channel.

Active control for high frequency boost or cut (±15 dB). Not functional on Normal channel.

Controls the intensity of the echo effect; can be controlled by remote footswitch.

Indicates power status; switch turns the unit on/off.

3-wire grounded power cord for safety. Avoid removing the ground pin.

1/4" jacks for 8 ohm or 4 ohm speaker connections.

Input for signals from external low-level effects or signal processing equipment.

Output for signals to external low-level effects or signal processing equipment.

Connects an optional footswitch for channel selection and reverb control.

Tone settings vary by guitar, strings, pickups, and playing style.

Details on power amp, preamp, frequency response, hum/noise, and power consumption.

Illustrates signal flow within the unit for functional understanding.

Read all instructions, avoid water, ensure ventilation, and handle cords carefully.

Information on permissible noise levels and the need for hearing protection.

Details Peavey's 1-year (90-day for tubes/meters) warranty against defects.

Instructions for registering the product and obtaining warranty service.