EasyManua.ls Logo

Peavey PV 15 PM User Manual

Peavey PV 15 PM
24 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.peavey.com
PV
®
15 PM
Powered bi-amplified two-way monitor speaker system
Operating
Manual
Question and Answer IconNeed help?

Do you have a question about the Peavey PV 15 PM and is the answer not in the manual?

Peavey PV 15 PM Specifications

General IconGeneral
Impedance8 Ohms
Woofer Size15 inch
Tweeter1.4 inches
Power Output200W continuous, 400W peak
OutputsXLR
Nominal Coverage90 x 40 degrees

Summary

Important Safety Instructions

Bottom Panel Overview

Fuse

Protects the unit from overloads and fault conditions with a fast-blow 3.15 Amp fuse.

IEC Power Cord Connection

Receptacle for the IEC line cord that provides AC power to the unit.

On-Off Switch

Rocker switch that supplies AC power to the unit when switched to the ON position.

Top Panel Controls and Inputs

Primary Input Jack

Switchable mic-level or line-level input via combo XLR and 1/4" TRS connector.

Mic/Line Pad Switch

Switches input sensitivity for mic-level or line-level signals.

Operating Instructions

Troubleshooting Common Issues

No Audio Output

Steps to diagnose and resolve issues when there is no sound output.

Hum or Buzz Issues

Explains common causes and solutions for hum or buzz in the audio signal.

Distorted or Fuzzy Sound

Troubleshooting tips for audio distortion or fuzzy sound quality.

Peavey Electronics Corporation Limited Warranty

Related product manuals