Peavey ReValver MK III - Page 15

Module name = Fox ACS-45
Descripon = This amp has three channels, all running at the same me; a Normal, Brilliant and
Tremolo channel. The Tone controls (Bass & Treble) only work on the Brilliant channel. The Tone
Cut control removes some high treble (on all channels), and works like a reversed presence
control.
Module name = HomeBrew SE-1
Descripon = The HomeBrew SE-1 is a low-waage, single ended amp with two channels. For a
low-waage circuit it has as many as 3 triode stages for gain. The amp has 2 channels, Clean/Dist.
Module name = The MatchBox
Descripon = The MatchBox is designed to provide clean to overdriven amplicaon with a
min imum of clipping. It has as many as 4 gain stages with considerable aenuaon between
stages. It has a power amp in a push-pull conguraon but no negave feedback (NFB). The
sound is  ng for both Guitar and bass. This amp uses a very special tube conguraon that gives
you an extra bright sound. For addional distoron, please try any of the distoron stomp boxes
in front of the amp.
14